History of Automobile

The early history of the automobile can be divided into a number of eras, based on the prevalent means of propulsion. Later periods were defined by trends in exterior styling, size, and utility preferences.

In 1769 the first steam-powered automobile capable of human transportation was built by Nicolas-Joseph Cugnot.^[1]

In 1808, François Isaac de Rivaz designed the first car powered by an internal combustion engine fueled by hydrogen.

In 1870 Siegfried Marcus built the first gasoline powered combustion engine, which he placed on a pushcart, building four progressively sophisticated combustion-engine cars over a 10-to-15-year span that influenced later cars. Marcus created the two-cycle combustion engine^{[citation needed]}. The car's second incarnation in 1880 introduced a four-cycle, gasoline-powered engine, an ingenious carburetor design and magneto ignition. He created an additional two models further refining his design with steering, a clutch and brakes.

The four-stroke petrol (gasoline) internal combustion engine that still constitutes the most prevalent form of modern automotive propulsion was patented by Nikolaus Otto. The similar four-stroke diesel engine was invented by Rudolf Diesel. The hydrogen fuel cell, one of the technologies hailed as a replacement for gasoline as an energy source for cars, was discovered in principle by Christian Friedrich Schönbein in 1838. The battery electric car owes its beginnings to Ányos Jedlik, one of the inventors of the electric motor, and Gaston Planté, who invented the lead–acid battery in 1859.^{[citation needed]}

In 1885, Karl Benz developed a petrol or gasoline powered automobile.^[2] This is also considered to be the first "production" vehicle as Benz made several other identical copies. The automobile was powered by a single^{[citation needed]} cylinder four-stroke engine.

In 1913, the Ford Model T, created by the Ford Motor Company five years prior, became the first automobile to be mass-produced on a moving assembly line. By 1927, Ford had produced over 15,000,000 Model T automobiles.

At the turn of the 20th century electrically powered automobiles became a popular alternative method of automobile propulsion.

Comments

Combined-Cycle Power Plant

Combine Power Plant use both Gas Turbine and Steam Turbine to produce energy. Natural gas use for gas turbine.The exhaust heat of gas turbine use in steam turbine. A schematic diagram are given below: Combined Cycle Generation Process

What is difference between plane angle and solid angle?

A plane angle is one that can be measured completely within a plane. This may be because the angle occurs in a 2-D space, or it is an angle that is contained completely within a plane that is in a 3-D (or higher-D) space. So the angles in a triangle are plane angles, because they are in a plane. Similarly, the angles in a spherical triangle are plane angles, because even though they measure things in a 3-D space, they can always be shown to be wholly within a plane. Another way to consider a plane angle is to think of angles within a circle. You can divide the circle up into 2π radians, for example, or 360°, or 400 gon, or whatever units you choose. However, the radian as a unit is defined by the subtended arc length that is equal to the radius of the circle. A steradian, the basic unit, is solid angle is one that is subtended by a portion of the surface area of a sphere that is equal to r^2, where r is the radius of the sphere. It can be considered to be a cone subtended at...

Francis Turbine Working Principle, Main Parts, Diagram and Application

Turbines using the impulse action of water are the best ones. No it’s not like that reaction turbines are more efficient, when all of this was happening, James B. Francis, an American civil engineer comes up with his turbine called Francis turbine. What’s different he is doing!!! He is just mixing them up. The good’s of both the impulse and reaction turbine, say water enters the turbine radially and exits axially. But that’s not a secret to his turbine efficiency. The magic lies in his amazing design of blades, these blades rotate using both reaction and impulse force of water flowing through them. The ability of francis turbine to use both the kinetic and potential energy to produce power, shorts out a major problem of water head availability as it could be used efficiently for head as low as 50m to as high as 400m and also for a wide range of flow rates which could be as low as 10 meter-cube per second to as high as 700 meter-cube per second. Francis Turbine BA...

Mechanical Engineering

Search This Blog